1
Bug Reports / Re: Lawn view doesn't lock
« on: November 20, 2014, 09:44:24 pm »
Any update on this, I have the same issue on my ipad and mac.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Bug Reports / Re: Can no longer access Controller
« on: July 25, 2014, 01:59:02 am »
Same here but my never came back after updating or trying to update to v1.2 firmware !
3
Feature Request / Re: Light Control
« on: April 23, 2014, 08:20:52 pm »
When you say power for the expander board - what I am trying to understand is whether you mean power just for switching to the zone outputs OR power to actually run the expander board logic ?
Because, if the power pin 1. is just supplying the 24v AC to the zone outputs this is ideal as it would allow presumably variable voltage and also DC to be switched to the zones if the expander board logic is actually powered from the main board of the bluespray. This would seem to make sense as you then only have to rectify the AC power to DC and regulate to the right logic voltage level once.
rgds,
Seedar.
Because, if the power pin 1. is just supplying the 24v AC to the zone outputs this is ideal as it would allow presumably variable voltage and also DC to be switched to the zones if the expander board logic is actually powered from the main board of the bluespray. This would seem to make sense as you then only have to rectify the AC power to DC and regulate to the right logic voltage level once.
rgds,
Seedar.
4
Feature Request / Re: Light Control
« on: April 15, 2014, 06:33:23 pm »
Thanks, just to clarify the expander board is already connected to 24V AC source, so what is pin 1 for on that connector, is that not the feed to all zone outputs that get switched to the solenoids ? Or is that for something else ?
Thanks.
Thanks.
5
Feature Request / Re: Light Control
« on: April 14, 2014, 08:40:14 pm »
I have a 16 zone controller but currently only using 8 and I have two questions:
1. Can I not see anymore than 8 zones in the UI because the second 8 are not connected ?
2. Are the second 8 zones isolated from the first 8 - and therefore I could supply 12V DC for the second 8 if they are controlling only lighting ?
thanks !
Seedar.
1. Can I not see anymore than 8 zones in the UI because the second 8 are not connected ?
2. Are the second 8 zones isolated from the first 8 - and therefore I could supply 12V DC for the second 8 if they are controlling only lighting ?
thanks !
Seedar.
6
Feature Request / Re: Lawn Picture
« on: April 14, 2014, 08:34:08 pm »
Ah, ok, I can see it from the internet - but thats because I have a VPN connection to my home network.
7
Help / Re: Mac Login Issues
« on: April 14, 2014, 07:21:25 pm »
Google Chrome works ok on my MacBook but Safari has the problem still. Firmware 1.1.2.
rgds,
Seedar.
rgds,
Seedar.
8
Bug Reports / Re: Login Popups
« on: April 14, 2014, 07:20:18 pm »
I still have the issue on Mac Mavericks with Safari, on the same Mac with Google Chrome it works ok.
Seedar.
Seedar.
9
Bug Reports / Re: Losing Our House Picture
« on: April 14, 2014, 07:19:26 pm »
Firmware is v1.1.2
I think on further testing it maybe an issue with the java code when connection to the bluespray is interrupted - rather than the non volatile memory in the bluespray being corrupted or erased.
rgds,
Seedar.
I think on further testing it maybe an issue with the java code when connection to the bluespray is interrupted - rather than the non volatile memory in the bluespray being corrupted or erased.
rgds,
Seedar.
10
Feature Request / Re: Lawn Picture
« on: April 13, 2014, 10:51:24 pm »
For anyone interested I managed to have my lawn picture on my local Synology NAS disk station and just enter the local shared link to my file on the bluespray and its all local now and works much quicker and more reliably ! I can provide more detail if anyone wishes.
rgds,
Seedar.
rgds,
Seedar.
11
Feature Request / Light Control
« on: April 13, 2014, 10:30:52 pm »
Hi,
I would like to be able to control an outside light with the controller in addition to the solenoids. I assume I could do that now if I added an external 24v AC relay to switch it and program it as a separate "Program" in the schedule ? I haven't experimented but I suspect the scheduling would be a little messy though with the current UI having to turn off stacking etc ?
rgds,
Seedar.
I would like to be able to control an outside light with the controller in addition to the solenoids. I assume I could do that now if I added an external 24v AC relay to switch it and program it as a separate "Program" in the schedule ? I haven't experimented but I suspect the scheduling would be a little messy though with the current UI having to turn off stacking etc ?
rgds,
Seedar.
12
Feature Request / Lawn Picture
« on: April 13, 2014, 10:27:43 pm »
Hi,
I would like the lawn picture to be either uploaded into the controller or be able to be accessed from a shared file on my local network. I have seen you reasons for someone else's request being size and security but I would think that having a URL site host a picture is worse for security in truth. Perhaps ideal is to allow the users local network to host the picture if size is the issue ? Can that already be done as is ?
rgds,
Seedar.
I would like the lawn picture to be either uploaded into the controller or be able to be accessed from a shared file on my local network. I have seen you reasons for someone else's request being size and security but I would think that having a URL site host a picture is worse for security in truth. Perhaps ideal is to allow the users local network to host the picture if size is the issue ? Can that already be done as is ?
rgds,
Seedar.
13
Bug Reports / Losing Our House Picture
« on: April 13, 2014, 08:27:37 pm »
Hi,
I have setup a picture of our garden in the Operations page of the settings and all settings from that page have been lost but the other pages appear to be ok. The program and zone times are all ok but in operations screen the text colour and the garden picture URL are all reset to factory default ? Is this a known issue ?
thanks,
Seedar.
I have setup a picture of our garden in the Operations page of the settings and all settings from that page have been lost but the other pages appear to be ok. The program and zone times are all ok but in operations screen the text colour and the garden picture URL are all reset to factory default ? Is this a known issue ?
thanks,
Seedar.
14
Help / Re: Mac Login Issues
« on: April 08, 2014, 11:28:25 pm »
I will retest as I now have a much stronger signal with an outside access point specifically for the Bluespray. Will let you know.
15
Help / Re: Mac Login Issues
« on: April 08, 2014, 05:01:16 pm »
Safari on iPad seems ok, will experiment a little more and let you know what I find with other browsers.
thanks.
By the way I had some initial issues with WiFi and 802.11g would not work had to switch to 802.11b, does it support 802.11b only ?
thanks.
By the way I had some initial issues with WiFi and 802.11g would not work had to switch to 802.11b, does it support 802.11b only ?
Pages: [1] 2